Using instructions:K-1000s support almost single wire light, the signal cable is DATA & GND,like UCS1903, UCS2902, TM1812, WS2811, WS2812B, WS2813, WS2815, SM16703, SK6812, etc,and signal cable is DATA, CLK, GND, like LPD6803, APA102, SK9822, etc,and RS-485 signal light, signal cable is A, B, GND,(or D+, D-, GND), like UCS512, TM512, etc.K-1000s read the file in the SD card to control light, the file is made by software LEDedit-2014, and LEDedit-2012 version, when make the file, only choose controller model T-1000, and IC type 1903, if your light is not 1903, just choosethe right IC on the controller by SET button, no need to make the file again as your chip, it is very friendly for changing your light after you made the file.

Specification:

1.Product name: addressable led controller

2.Addressable program: Yes

3.Working Voltage: DC5V-24V

4.Power: 2W

5.Ports Number: 1PCS

6.Max Controller Pixels: 2048Pixels, 2048pixels/port

7.Working Temperature: -30℃~85℃

8.Product Size:158*79*25MM

9.SD Card Support: Yes

10.Net Weight: 0.24KG

11.LED display fcuntion

12.Support Multiple synchronization: Yes

13.Application: Most of led lights with IC Chips

14.Can control 32-65536 grayscale, Gamma software correcting processing

15.Support all kinds of light source of point, line and surface. Fits for regular and irregular shape of lights project.

16.Light's signal will be connected to DAT, clock wire will be connected to CLK, negative wire will b single wire and double wire IC type lights, when used for single wire IC types, there is no needing to connect to CLK wire. 17.Support IC Types:

A.Single wire IC: UCS1912, TM1803, TM1804, TM1809, TM1812, UCS2903, UCS2909, UCS2912, 8205,8206,16703, WS2811 etc.

B.Double wire IC: MX5109, LPD6803, D705,P9803, MX8109, SM16726, P9813, LPD8806, WS2801

C.New IC: TM1914, 9883

Specification of memory SD card1.Type: SD card(If control much led lights, high speed SD card will be recommended)

2.Memory: 128MB

3.Format: Support FAT and FAT32

4.Save Fat: *.led

Operation of button:

SPEED+: Accelerate the playing speed, max speed is S-19

SPEED-: Slow down the playing speed, min speed is S-01

MODE: Switch to programs

SET: Set IC types, choose current IC type and wait it automatic save after 8 seconds. Then restart the power.

Note: Don't power off after choosing IC type and program, until wait about 8 second, all the setting is saved automatically.

Support IC:

LPD8806/LPD8809/LPD6803/D705/1101/6909/6912/TM1803/TM1804/TM1809/TM1812/TM1903/TM1904/TM1909/TM1912/UCS6909/UCS6912/UCS7009/UCS5903/UCS1903/UCS1909/UCS1912/UCS3903/DMX512/WS2801/WS2803/WS2811/DS189/TLS3001/TLS3002/TLS3008/P9813/SM16715/SM16716/BS0901,BS0902/BS0815