Features of 10A*4CH DMX512 Decoder DE8358:

1,Meets DMX512/1990 Signal,with RJ45 and XLR-3 interface to choose.

2,256-levels brightness,full-color with driver controls.

3,Power without flashing, smooth at low.

4,Output 4 channels, single channel maximum 10 A output drive, total output is less than 40 A.

5,Can achieve asynchronous color changes effect under working with controller.

6,With the light color selected mechanism, and be able to control the light with 1~4 colors.

7,Through dip switch to set DMX address freely.

8,Modularizing and can be matched with different LED module neatly.

9,Custom-made available and 3 years warranty.

Tech-parameter of 10A*4CH DMX512 Decoder DE8358:

Input: DC12-24V                         Control Channels:4CH           Output Current:  10A/CH Max40A

Max Power:  480W/960W           Frequnce:  <5000Hz                 Working Temperature:  -30-70℃

Signal Out:  Constant Voltage PWM Signal                                 The Light Gray Level:  256

Protection Grade:  IP40              Gross Weight:  400g                 Product Size: L122*W107*H33mm

1, Drive output interface is altogether anode drive, two V+ interface for input and output, each terminal pass 20A current, 4 channels OUTPUT- interface. CH1 and CH2, CH3, CH4, can meet all kinds of full color module and monochrome module and automatically according to the lamps module load adjust output current, each channel maximum current is not more than 10 amps. Note: Altogether anode connection full-color module which can be directly and refers to the CH1 and CH2, CH3, CH4, line connected to the decoder output interface corresponding foot position; Monochromatic module can be connected to the output of the decoder refers to the interface V + feet, negative line according to the color of the module connected to the decoder any of output interface CH1 or CH2, CH3, CH4, a foot position; A few kinds of color of monochromatic module received the same decoder, must will be their positive line to decoder output interface V+ feet.

2, With self test procedures, keep all 1-9 dip switch up, all 4CH full output during 3s, then each channel gradient.

Input: DC12-24V                        

Control Channels:4CH          

Output Current:  10A/CH Max40A

Max Power:  480W/960W          

Frequnce:  <5000Hz                

Working Temperature:  -30-70℃

Signal Out:  Constant Voltage PWM Signal                                

The Light Gray Level:  256

Protection Grade:  IP40              

Gross Weight:  400g                

Product Size: L122*W107*H33mm